Packet Tracer – Skills Integration Challenge
Addressing Table
Objectives
· Configure hostnames and IP addresses on two Cisco Internetwork Operating System (IOS) switches using the command-line interface (CLI).
· Use Cisco IOS commands to specify or limit access to the device configurations.
· Use IOS commands to save the running configuration.
· Configure two host devices with IP addresses.
· Verify connectivity between the two PC end devices.
Scenario
As a recently hired LAN technician, your network manager has asked you to demonstrate your ability to configure a small LAN. Your tasks include configuring initial settings on two switches using the Cisco IOS and configuring IP address parameters on host devices to provide end-to-end connectivity. You are to use two switches and two hosts/PCs on a cabled and powered network.
Requirements
· Use a console connection to access each switch.
· Name ASw-1 and ASw-2 switches.
· Use the R4Xe3 password for all lines.
· Use the C4aJa secret password.
· Encrypt all clear text passwords.
· Include the word warning in the message-of-the-day (MOTD) Banner.
· Configure addressing for all devices according to the Addressing Table.
· Save your configurations.
· Verify connectivity between all devices.
Note: Click Check Results to see your progress. Click Reset Activity to generate a new set of requirements. If you click on this before you complete the activity, all configurations will be lost.
Instructions:
Download Pka file and PDF file below:
[sociallocker id=”8545″]
[wpdm_package id=’4769′]
[wpdm_package id=’8560′]
[/sociallocker]